MyTechFun.com

It's big: Artillery Sidewinder X1 V4 3D printer assembly and review

Title: It's big: Artillery Sidewinder X1 V4 3D printer assembly and review. Watch on youtube: https://youtu.be/gxqCGK7_alE

Tags: 3dprint, artillery3d, review, unboxing,

This video is a review of Artillery Sidewinder X1 V4. This is my biggest 3D printer so far with printing volume of 300x300x400 mm (xyz). It has a direct drive extruder which makes it suitable for working with flexible filaments almost on speed of PLA printing. Nice clean design, without hanging wires all over the space. The bed heating is unique, it uses AC power for much faster heating. Printing area is big, but it still uses manual (assisted) bed leveling. I had some problems with stock glass surface and old filaments. PEI sheet is recommended. Also useful upgrade would be BLTouch auto leveling sensor and 0.6 or 0.8 mm nozzle. More info in the video.

Contents:
0:00 Introduction
3:06 Unboxing
4:30 Assembling
15:38 Bed leveling
18:06 Hardware analysing
20:19 Preparing slicer (Cura)
20:56 3D printing PLA (Attempt)
25:42 3D printing flex filament
28:15 3D printing PLA (success)
29:40 3D printing some upgrades
33:00 Final thoughts

Mentioned sites, videos:
https://artillery3d.com/products/artillery-sidewinder-x1-sw-x1-3d-printer-300x300x400mm-large-plus-size-high-precision-dual-z-axis-tft-touch-screen

Info about Nozzle max temperature on Banggood site:
https://www.banggood.com/custlink/vKGda3s9wy

Used STL files can be downloaded from:
https://www.mytechfun.com/video/89

Makers Mashup installing PEI sheet:
https://youtu.be/eToxcc7n0gs?t=253

Noizie Works installing PEI sheet:
https://youtu.be/hV6ndrTpsDU?t=50

#artillerysidewinderx1 #3dprinting #sidewinderx1


Download files:

spool_holder.stl 196.4 kB [View»]
tensioner_3mm.stl 40.2 kB [View»]
tensioner_5mm.stl 37.9 kB [View»]

© 2019+ mytechfun.com | Terms of Use