MyTechFun.com
PLA / Prusa by Prusa
Tested PLA: Prusa (by Prusa). Color of the filament in test: Yellow. The experiment can be seen in this video: https://youtu.be/L9tNhfxs9BU
Official recommended printing temperatures:
| Tmin | Tmax |
| 205 °C | 225 °C |
| 401 °F | 437 °F |
Test specimens are printed at 210°C (410°F)
Results of the mechanical testing
Testing method is described on this page. In most cases the break load is measured (in kg).
| Test type | Value | Icon |
|---|---|---|
| Tensile (pulling) test | 98 kg | 8 |
| Layer adhesion | 56.6 kg | |
| Impact test | - | I |
| Shear stress | - | m |
| Bending | - | |
| Torque (twist) | - | |
| Elasticity test | - |
Images (spool, temperature tower, Benchy..):
prusa Prusa Prusa https://youtu.be/L9tNhfxs9BU 205 225 210 Yellow 98 56.6 - - - - - x
© 2019+ mytechfun.com | Terms of Use